Silicone IP68 12W/M SMD5050 Flexible Underground Led Mining Lights

Flexible Led Light Strips Features

Imported chip
Stability is strong, super bright, wide light Angle
Parallel to the lateral resistance
Lamp with arbitrary bending don't damage the circuit board
conductor
Conductive performance is good, safe heat resistant,long service life
Import silicon environmental protection colloid
High light transmittance and strong toughness Waterproof, environmental protection,heat flame retardant.

Heavy Duty led strip light Specificaton:

• For using In mines, hazardous by gas (methane) or coal dust
  - Temperature for storage and transportation: ± 40 ° C
  - Operating Temperature: - 10 / +20 ° C
  - Relative humidity,%, at a temperature of + 40 ° C: - till 100%
  - Dustiness of ambient air, mg / m3, no more: 1000 mg/m3
  - Rated supply voltage: 12V/36V/110-130V AC /220-240VAC (preferably switchable)
  - Luminous flux, Lm / m: 2000
  - Color temperature, K: 3000K/4000K/5000K/6000K/7000K/10000K
  - Lighting angle, degrees: 180
  - Number of LEDs, pcs / m: 60-80 LEDs/m
  - MTBF: 45000 H
  - Degradation of luminous flux,% / year: 5-7%
  - protection against dust and moisture: IP68
  - LED Strip Housing Material: Silicon, flame retardant.
  - Surge and surge protection

Main Parameter of Flexible Led Light Strips  :

low voltage led strip lights Save big on energy costs.
It's well-known that LED lighting uses a fraction of the energy compared to conventional lighting sources such as metal halide or sodium lamps. With a typical power rating of 400W, lighting a 100 meter distance with lamps consumes 4000W continuously. Compare this to our LED strip lighting which consumes only 16W per meter for a total only 1600W over that same 100 meter distance! With thousands of meters of lighting requirements underground, it becomes clear how LED will save your mine money.

Better lighting is safer.
One of the pitfalls with conventional lighting is uneven light, referred to as "high and low spots" of luminescence that causes glare and confusion. This condition increases the risk of a hazardous work environment – especially when lighting failure occurs, leaving even darker areas with no lighting at all. LED strip lighting solves this by providing full lighting coverage, end to end, with no high or low spots, ensuring a constant and stable lighting solution.

Set it and forget it.
Conventional lighting such as metal halide or sodium lamps are prone to premature failure due to the harsh environmental conditions in underground mines. As a result, these lighting systems are known to lose up to 50% of luminescence within the first 4 to 6 months, and rarely last beyond 12 months. Continually replacing lamps throughout the mine is costly and adds to your annual lighting energy costs in a big way. LED strip lighting is not affected by the mine environment and loses +-1 to 2% per annum with a lifespan of 5 years. And best of all, damaged strips can be repaired in 8" sections – saving time and money.

Heavy Duty Led Strip Lights Lifespan

Led Strip Lights Reduced maintenance requirements

By comparison, the working life of a fluorescent light is significantly shorter than five years and therefore requires more frequent changing out of the light source, more maintenance activity and potential operation impact.

LED Strip Lighting does not typically fail catastrophically, as is usually the case with fluorescent lighting, but rather the light output generally decreases over time. This allows for a regular maintenance schedule and replacement prior to failure, maintaining consistency of lighting and improving safety underground.

The optimum solution for mining illumination, Green Lighting LED Strip Lighting is made of a high grade, fire retardant soft Silica Gel and is IP68 rated, making it compact and robust.

 Led Strip Lights Usage Scale

Use for underground mines, tunnel, bridge, industrial lighting, home decoration